Gelbo Flex Durability Tester for Flexible Barrier Materials and complies with ASTM test method F392

ASTM F392 Flex Durability Tester is used to measure the resistance against repetitive strain for films, composites and coating films, etc. Flex failure is determined by measuring the pinholes formed in the sample structure. It is also called Gelboflex.

ASTM F392 Flex Durability Tester Principle

The sample (200*280 mm) is attached to the flex tester mandrels. The flexing action consists of a twisting motion combined with a horizontal motion (compression), thus repeatedly twisting and crushing the film. The test set up gives a twisting motion of 440º in the first 90 mm of the stroke and is followed by a straight horizontal motion of 65 mm. The speed is 45 cycles per minute.

ASTM F392 Flex Durability Tester Technical data

ASTM F392 Flex Durability Tester​ Features

1. PLC control and 7 inch touch screen operation
2. 5 standard test modes and 4 test stations
3. Long and short stroke fast switching
4. Condition A,B,C,D and E can be chosen
5. Micro printer(Optional)

Standard: ASTM F392, "Flex durability of flexible barrier materials".

Gelbo Flex Durability Tester for Flexible Barrier Materials and complies with ASTM test method F392 Images